New 2400 PrecisionCut™ Gas Triplex Mower

Specifications

Number of cylinders	Two
Displacement	694 cc 42.4 cu in.
Mowing speed	Adjustable mow stop: 0-7.1 km/h 0-4.4 mph
Traction drive	Hydrostatic, two-pedal control
Mowing position width	157.5 cm 62 in.
Cutting unit size, in. (cm)	Quick Adjust QA5 floating: 55.9 cm 22 in.
Clip frequency	For 14 blade: 0.541 mm/km/h 0.034 in./mph With 11-blade reel: 0.689 mm/km/h 0.044 in./mph With 7-blade reel: 1.082 mm/km/h 0.069 in./mph
Height of cut	With 51-mm (2-in.) front roller: 2.0-19.0 mm 0.078-0.75 in. With 76 -mm (3-in.) fromt roller: 16-32 mm 0.625-1.25 in.
Number of blades	7, 11, or 14 blades
Operator ear	80 dBA

Type	Gas model KOHLER® ECH630 EFI gas with electronic throttle body
Horsepower	Gas horsepower At 3600 rpm: 14.2 kW 19 hp Engine manufacturer gross power, tested in accordance with SAE J1940 / J1995
Air cleaner	Foam precleaner with paper element
Cooling	Oil filter Full-flow filter Engine oil capacity With filter: 1.9 L 2 U.S. qt Pressurized lubrication system Standard Number of cylinders Two Displacement 694 cc 42.4 cu in. Air

Charging system	Flywheel, alternator
Alternator capacity	16 amp
Ignition	Capacitor discharge ignition (CDI)
Battery type	BCI group 40 maintenance-free: 12 V
Starter	Electric (solenoid shift)

Wheels and tires	Front/rear 18x10.5-10, 2-ply, smooth (low compaction) 20x10-10, 2-ply or 4-ply, smooth or 20x10-10, 2-ply, turf
Brakes	Single-pedal, 2-wheel disc brakes
Mowing speed	Adjustable mow stop: 0-7.1 km/h 0-4.4 mph
Transport speed	0-12.9 km/h 0-8 mph
Reverse speed	0-4.8 km/h 0-3 mph
Ground clearance with catcher	10.2 cm 4 in.
Fuel tank capacity	In a single tank: 29.5 L 7.8 U.S. gal.
Muffler	Horizontal discharge below frame
Hydrostatic drive system capacity	28.8 L 7.6 U.S. gal.
Hydraulic reservoir capacity (only)	20.4 L 5.4 U.S. gal.
Ground drive, reel drive	Drive wheels Front Traction drive Hydrostatic, two-pedal control Reel drive Hydraulic
Pump	Three-section gear
Reel control valves	Electrohydraulic, one valve reel on-off and one valve raise-lower
Filtration	10-micron

Steering	Hydrostatic, adjustable steering column
Reel drive and reel lift	Right-hand operated (optional foot-lift controls)
Throttle	Right hand
Park brake	Right foot
Hydrostatic speed control	Forward Right foot Reverse Right foot
Ignition	Key start and shutoff
Glow plug switch and indicator light

Engine oil pressure	Light-emitting diode (LED) warning light
Alternator	LED warning light
Hydraulic oil temperature	LED warning light
Engine coolant temperature	LED warning light
Hourmeter	Digital

Diagnostics
Safety Interlocks

Wheelbase	129.5 cm 51 in.
Tread width	101.5 cm 40 in.
Mowing position width	157.5 cm 62 in.
Turning radius, uncut circle	45.7 cm 18 in.
Weight (full fluids, no operator or fuel)	559.2 kg 1233 lb
Height	With ROPS: 195.6 cm 77 in.

Number	Three - offset design
Size, in. (cm)	QA5 floating: 55.9 cm 22 in.
Backlapping	Standard on-board micro-backlapping and reel speed control
Clip frequency	For 14 blade: 0.541 mm/km/h 0.034 in./mph With 11-blade reel: 0.689 0.044 in./mph With 7-blade reel: 1.082 mm/km/h 0.069 in./mph
Front rollers	Optional smooth, grooved, or spiral: 5.1 cm 2 in.
Reel diameter	12.7 cm 5 in.
Bedknife adjustment	Bedknife-to-reel
Height of cut	With 51-mm (2-in.) front roller: 2.0-19.0 mm 0.078-0.75 in. With 76 -mm (3-in.) fromt roller: 16-32 mm 0.625-1.25 in.
Number of blades	7, 11, or 14 blades
Mower lift	One cylinder for front two units; one cylinder for rear unit
Reel speed	Adjustable

Number	ANSI B71.4-2017
ROPS	Two-post SAE J21294 rollover protective structure with seat belts meets ISO 21299 standards
Engine	Meets CARB and EPA

Operator ear	80 dBA
Measuring standard	ISO 11201
Attachments installed	Greens Tender™ conditioners and power brushes, reels engaged

Date collected	11-Feb-2020