New 2750 E-Cut™ Hybrid Triplex Mower

Specifications

Number of cylinders	Three
Displacement	993 cc 60.6 cu in.
Mowing speed	0 to 9.7 km/h 0 to 6 mph Adjustable via passcode-protected TechControl display Cleanup Pass mode also selectable
Reel drive	Electric
Reel power source	Alternator: 56 V 100 amp
Mower size	Quick Adjust 5 (QA5) floating, standard: 55.9 cm 22 in.
Clip frequency	14-blade: 0.54 mm/km/h 0.034 in./mph 11-blade: 0.69 mm/km/h 0.044 in./mph 7-blade: 1.08 mm/km/h 0.069 in./mph Adjustable in TechControl display
Reel diameter	12.7 cm 5 in.
Height-of-cut	With 51 mm (2-in.) front roller: 2-36 mm 0.079-1.42 in. With 76.2 mm (3-in.) front roller: 4-46 mm 0.16-1.81 in.
Mowing position width	157.5 cm 62 in.

Type	Yanmar® 3TNV74F, indirect injection, electronically controlled
Engine horsepower	At 3600 rpm: 14.6 kW 19.6 hp Engine manufacturer gross power, tested in accordance with SAE J1940 / J1995
Air cleaner	Semi cyclone, dry type, dual stage, 1/4 turn
Cooling	Liquid
Oil filter	Full-flow filter
Engine oil capacity	With filter: 2.2 L 2.3 U.S. qt
Pressurized lubrication system	Standard
Number of cylinders	Three
Displacement	993 cc 60.6 cu in.

Charging system	Flywheel, alternator
Alternator capacity	55 amp
Ignition	CDI
Battery type	BCI group 51 maintenance free - 12 V
Starter	Electric (solenoid shift)

Wheels and tires	Front 20x10-10 (smooth, smooth balloon, or turf tread) Rear 20x10-10 (smooth, smooth balloon, or turf tread)
Brakes	Type Hand lever operated, two-wheel disc brakes
Mowing speed	0 to 9.7 km/h 0 to 6 mph Adjustable via passcode-protected TechControl display Cleanup Pass mode also selectable
Transport speed	0 to 17.7 km/h 0 to 11 mph Adjustable via passcode-protected TechControl display
Reverse speed	0 to 6.4 km/h 0 to 4 mph
Ground clearance with catcher	11.4 cm 4.5 in.
Fuel tank capacity	20 L 5.3 U.S. gal.
Muffler	Three chamber, round
Hydrostatic capacity (total)	20 L 5.3 U.S. gal.
Hydrostatic reservoir capacity (only)	16 L 4.2 U.S. gal.
Ground drive, reel drive	Traction drive eHydro™ - electronically controlled hydraulic traction pump; dual pedal Reel drive Electric Reel power source Alternator: 56 V 100 amp Reel control Independent electronic reel controllers
Hydraulic filtration	8 micron
Filtration

Number	Three
Size	QA5 floating, standard: 55.9 cm 22 in.
Backlapping	Engagement/disengagement and rpm controlled through passcode-protected Tech Control display
Clip frequency	14-blade: 0.54 mm/km/h 0.034 in./mph 11-blade: 0.69 mm/km/h 0.044 in./mph 7-blade: 1.08 mm/km/h 0.069 in./mph Adjustable in TechControl display
Front rollers	Optional smooth, grooved, spiral, or MT: 5.1 cm 2 in. Optional smooth, grooved, or spiral: 7.6 cm 3 in.
Reel diameter	12.7 cm 5 in.
Bedknife adjustment	Bedknife-to-reel
Height-of-cut	With 51 mm (2-in.) front roller: 2-36 mm 0.079-1.42 in. With 76.2 mm (3-in.) front roller: 4-46 mm 0.16-1.81 in.
Number of blades	7, 11 or 14
Mower lift	Three independent hydraulic cylinders Lift rate, lower rate, and front-to-rear timing adjustable via passcode-protected TechControl display

Steering	Hydraulic, gear pump with double-acting steering cylinder No-tool adjustable column and tilt wheel
Reel lift	Right-hand joystick control for lift/lower Three independent hydraulic cylinders Lift rate, lower rate, and front-to-rear timing adjustable via passcode-protected TechControl display
Throttle	Electronically controlled AutoPedal™ foot controls in transport PTO rpm control through TechControl display Three modes: Max, Eco, Min
Park brake	Mechanical hand lever to left of seat
Reel drive	Yellow two-position switch for power take-off (PTO) on right-hand CommandARM™ console
Glow plug switch and indicator light	Glow plugs with automatic timer. Indicator on TechControl when engaged. Start after glow plug relay turns off.
Hydrostatic speed	Forward Electronic, right foot operated, located to left of reverse pedal Reverse Electronic, right foot operated, located to right of forward pedal
Ignition	Key start and shutoff

Engine oil pressure	Warning icon and diagnostic trouble code on TechControl display
Alternator	Warning icon and diagnostic trouble code on TechControl display
Hydraulic oil temperature	Warning icon and diagnostic trouble code on TechControl display
Engine coolant temperature	Warning icon and diagnostic trouble code on TechControl display
Hourmeter	Digital on main TechControl operating screen

Diagnostics	On-board diagnostics with TechControl display
Safety interlocks	Operator presence switch (in seat), neutral, mow/transport switch, park brake set switch

Number	ANSI B71.4-2017
ROPS	Two-post SAE J21294 rollover protective structure with seat belts meets ISO 21299 standards
Engine	Meets Environmental Protection Agency (EPA) and California Air Resources Board (CARB) requirements

Wheelbase	Front to rear: 130 cm 51.2 in.
Tread width	157.2 cm 61.9 in.
Mowing position width	157.5 cm 62 in.
Turning radius uncut circle	45.7 cm 18 in.
Weight (full fluids, no operator or fuel)	Standard seat, reels down: 641 kg 1410 lb

Full engine rpm	With GTC and power brush attachments Max mode: 83 dBA
Reduced engine rpm (2250)	With GTC and power brush attachments Eco mode: 81 dBA

Date collected	30-Sept-2019