New H180 Loader

Heavy-duty buckets

Heavy-duty buckets are available for tasks requiring more robust bucket designs. Recommended for heavier use applications, such as commercial operations.

Top surface of the bucket is parallel to the cutting edge, which aids operator as a leveling guide.

Additional strength is built into the bucket design with additional wear bars, boxed top bucket section, and bucket end plate supports.

Cutting edge has pre-drilled holes for addition of a replaceable cutting edge.

1550-mm (61-in.) materials bucket

Materials buckets are available to match tractor-loader applications. The buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks.

IMPORTANT: Materials buckets are not recommended for heavy-duty tasks. For heavier use applications, use heavy-duty bucket.

The top surface of the bucket is parallel to the cutting edge, which aids the operator as a leveling guide.

There is a quik-change connection for easy on and off.

The round-back design helps material flow when filling or dumping the bucket.

72-in. Quik-Tatch heavy-duty bucket

A general purpose heavy-duty bucket is available for field installation. This bucket is recommended for moderate to severe-duty applications. It includes a bolt-on reversible and replaceable cutting edge.

NOTE: This bucket will ship from Quad-Cities warehouse location.

72-in. Quik-Tatch standard-duty bucket

An economical standard-duty bucket is available for field installation. This bucket is recommended for light-duty applications. It does not include a bolt-on replaceable cutting edge.

NOTE: This bucket will ship from Quad Cities warehouse location.

Heavy-duty buckets

Heavy-duty buckets

Heavy-duty buckets are available for tasks requiring more robust bucket designs.

Recommended for heavier use applications, such as commercial operations.

Top surface of the bucket is parallel to the cutting edge, which aids operator as a leveling guide.

Additional strength is built into the bucket design with additional wear bars, boxed top bucket section, and bucket end plate supports.

Cutting edge has pre-drilled holes for addition of a replaceable cutting edge.
Now equipped with bucket loops for chain applications.

Heavy-duty buckets

Heavy-duty buckets are available for tasks requiring more robust bucket designs. Recommended for heavier use applications, such as commercial operations.

Top surface of the bucket is parallel to the cutting edge, which aids operator as a leveling guide.

Additional strength is built into the bucket design with additional wear bars, boxed top bucket section, and bucket end plate supports.

Cutting edge has pre-drilled holes for addition of a replaceable cutting edge.

High-volume bucket

This is a large-capacity bucket for the 300CX, H165, 400X, 400CX, and H180 Loaders for light material use such as handling mulch, sawdust, feed, and snow.

IMPORTANT: Not designed to withstand heavy material or usages other than light materials.

The top surface of the bucket is parallel to the cutting edge, which aids operator as a leveling guide.

Quick-change for easy on and off. 

Round-back design helps material flow when filling or dumping the bucket.

Materials buckets

Materials buckets are available to match tractor and loader applications. May be used for loading dirt, gravel, feed and light materials, as well as scrapping, digging and other general purpose tasks.

IMPORTANT: Materials buckets are not recommended for heavy-duty tasks. For heavier-use applications, use the heavy-duty bucket.

Top surface of the bucket is parallel to cutting edge, which aids operator as a leveling guide.

Quik-Change connection for easy on and off.

Round-back design helps material flow when filling or dumping the bucket.

213.4-cm (84-in.) light-materials bucket

A utility or light-materials loader bucket is available for field installation or OE bucket replacement. This bucket is recommended for efficient movement of light or high-volume materials (less than 75 lb/cu ft or 1.22 kg/cu L).

At 213.4 cm (84-in.), it is 0.3-m (1-ft) wider than the standard buckets. It also has a slightly higher and longer profile. It does not include a bolt-on replaceable cutting edge.

NOTE: This bucket will ship from the Quad Cities warehouse location.

High-volume bucket

This is a large-capacity bucket for the 300CX, H165, 400X, 400CX, and H180 Loaders for light material use such as handling mulch, sawdust, feed, and snow.

 IMPORTANT: Not designed to withstand heavy material or usages other than light materials.

The top surface of the bucket is parallel to the cutting edge, which aids operator as a leveling guide.

Quick-change for easy on and off. 

Round-back design helps material flow when filling or dumping the bucket.

Recommended for heavier use applications, such as commercial operations and rental customers.

Additional strength is added to the cutting edge and the replaceable cutting edge is reversible for longer wear life.

Not compatible with tooth bars.

NOTE:  Heavy-duty buckets come standard with the holes to install the replaceable cutting edge.  Standard materials buckets require installation of attaching holes.

Bucket cutting edge

Closeup of cutting edge

Hardware for cutting edge

Recommended for heavier-use applications, such as commercial operations and rental customers. Additional strength is added to the cutting edge. Replaceable and reversible cutting edge for longer wear life.

iMatch quick-coupler bushing kit

Bushing kit for use with Category 1 implements (ballast box) to make them function correctly with the iMatch Quick-Hitch.

Third-function hydraulic lines and hoses

Attachment BW16414 provides metal lines along boom and flexible hydraulic hoses to connect to tractor mid-valve

Provides hydraulic couplers at the front of the loader boom for operating attachments that require third-function hydraulics.

NOTES:

1. Tractor must be equipped with a third selective control valve (SCV).
2. If installing H180 Loader on 4M Tractor, the dual mid-valve and third electrohydraulic (EH) valve kit will be needed from tractor hydraulics.
3. If used with skid steer attachments, couplers will not match. The following parts are required to convert for this application:

A hood guard with brush screen for 4R Tractors.

Deluxe hood guard attachment

Hood guard attachment to make BW15219 or BW15221 into a deluxe hood guard.

A hood guard with brush screen for 4R Tractors.

Hood guard for 4R Series Tractors

A hood guard can be ordered for a tractor without ordering a loader.

The hood guard protects the front of the tractor while operating the loader.

The bolt-on design stays with tractor when loader is removed.

Deluxe hood guard with brush screen

A hood guard can be ordered for a tractor without ordering a loader.

The hood guard protects the front of the tractor while operating the loader.

The bolt-on design stays with tractor when loader is removed.

This attachment allows for the installation of the dual mid-valve kit on 4M Tractors. With this kit 4M Tractors can now utilize various implements, such as the H180 Loader, as well as other hydraulic driven implements. This kit allows the 4M Tractor to operate hydraulically and function similar to the 4R Open Station Tractors.

Kit contains the dual mid-valve, loader joystick, hydraulic lines, and all fittings / hardware that is required.

Dual mid-valve (Shown on 4R)

Hydraulic lines from mid-valve to tractor

Two-function joystick (Shown on 4R)

Complete kit images

Available Dec, 2016

Shown with boom removed

This bundle consists of the hoses and parts to connect from the loader boom hydraulic lines of the H180 Loader to the mid-mount area hydraulic couplers on the compatible tractor.

NOTE: For an H180 Loader/4M Tractor field-installed dual mid-valve kit see BLV10879.

Single-point connector shown on H180 Loader on a 4R Tractor

Single-point connector shown on H180 Loader on a 4R Tractor

Single-point connector shown on H180 Loader on a 4R Tractor

Single-point connector shown on H180 Loader on a 4R Tractor

This option, only available on open operator station (OOS) tractors, contains the hoses and single-point hydraulic connector to run from the tractor mid-valve to the H180 Loader. The single-point connector allows the customer to park and remove the loader with even more ease than the traditional multi-couplers.

NOTE: For an H180 Loader/4M Tractor field-installed dual mid-valve kit see BLV10879.

Nitrogen-charged accumulator and electric valve

Operator on/off switch

LSS on H180

LSS on 5E and 5M

An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.

• An accumulator charged with nitrogen and connected to the head-end lift cylinder hose through a T-fitting provides shock absorption
• The cylinders move in and out to allow the boom to float 

Performance

• Bales can be transported more efficiently from one end of the field to the other over frozen, hard-packed, or rutted terrain.

NOTE: Check bale handling capability of tractor before use.

• Pallets can be moved easily without sustaining cargo damage
• Pallets of seed or fertilizer can be carried across a yard without a bag spilling and creating a costly mess
• Properly ballasted tractor with LSS has increased stability, creating a smoother ride for the operator

Cost of Ownership

• Extended life of loader pins and bushings
• Less stress on tractor axle

Reasons for turning LSS off include:

• Digging applications - With LSS on, the cylinders retract slightly, losing lifting power
• Holding a grade when blading - With LSS on, it is difficult to hold a constant grade
• Precise pallet and bale handling - With LSS on, the load moves up and down slightly while being positioned
• Parking a loader - With LSS on, when down pressure is applied, the lift cylinders retract slightly, making it more difficult to park

The switch is conveniently located in the operator station to avoid having to exit the operator station to manually move the handle on the LSS.

LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the H180 the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.

Bucket level indicator

The bucket level indicator assists the operator to determine the attachment position at ground level.

It is adjustable to indicate level position for different attachments such as pallet forks and buckets.

The indicator is adjusted to have the bend of the rod rest in the bracket when the attachment is level at ground.

Deluxe hood guard with brush screen

A hood guard can be ordered for a tractor without ordering a loader.

The hood guard protects the front of the tractor while operating the loader.

The bolt-on design stays with tractor when loader is removed.

Skid steer attachment carrier

The skid steer attachment carrier is installed in place of the standard John Deere attachment carrier and allows for the use of skid steer attachments on the 300CX, H160, H165, H180, 400X and 400CX Loaders.

Skid steer attachments are available through Worksite Pro™ attachments.

OOS mounting frame

Mounting frames are designed at the same time as the tractor in order to provide durable and yet very simple attaching points for the loader. The mounting frames bolt to the tractor chassis and do not restrict tractor use when the loader is not installed. 

Cab mounting frame

Mounting frames are designed at the same time as the tractor in order to provide durable and yet very simple attaching points for the loader. The mounting frames bolt to the tractor chassis and do not restrict tractor use when the loader is not installed.

Tooth bar

The tooth bar helps penetrate hard-packed material.  It attaches to the bucket by sliding over the cutting edge and is retained by two bolts, one in each end plate of the bucket.

• Holes must be drilled in bucket end plates to retain the tooth bar
• Protrudes beyond bucket edge approximately 150 mm or 6 in.
• Recommended for use with heavy-duty buckets only
• Not compatible with buckets with replaceable cutting edge installed

Tooth bar

The tooth bar helps penetrate hard-packed material.  It attaches to the bucket by sliding over the cutting edge and is retained by two bolts, one in each end plate of the bucket.

• Holes must be drilled in bucket end plates to retain the tooth bar
• Protrudes beyond bucket edge approximately 150 mm or 6 in.
• Recommended for use with heavy-duty buckets only
• Not compatible with buckets with replaceable cutting edge installed